It appears that your cart is currently empty
MHL Gloss 10mil 51" x 250' Low Temp Thermal Laminating Film
Key Features
- 250' roll length
- Optimum clarity
- Melts as low as 190 - 220 degrees F
Product Description
MHL Gloss 10mil UV Low Melt films offer superior clarity and lower melting temperatures. The adhesive used is formulated to activate at temperatures as low as 190 F - 220 F. MHL Gloss UV films are ideal for encapsulation of xerographic and inkjet-bond output. While many operators prefer using 3.0 mil MHL Gloss UV on the top and a 5.0 or 10 mil film on the bottom for added rigidity, any combination of thicknesses will provide bright, punch colors and optimum clarity.
Product Details
- Film Width: 25" - 61"
- Film Length: 250'
- Film Thickness: 10.0mil
- Core Size: 3"
- Finish: High Gloss
- Base Film: 7.0mil (25 micron) polyester
- Adhesive: 3.0 mil (25 micron) co-extruded polyethylene copolymer
- Initial Tack: None
- Application Speed: 1' - 5' per minute
- Application Temperature: 200 F - 230 F
- Release Liner: None
Item Specifications
- Specifically developed for multi-heat roller laminators (MHL) and hotshoe laminators
- Co-extruded for a carefully balanced ratio of polyester film to adhesive.
- Higher clarity for more vibrant colors, reduced "orange peel", greater rigidity (which reduces wrinkles and waves) and better adhesive flow characteristics (wet out).
- Available in a variety of thicknesses and finishes from standard gloss and lustre finishes to scratch-resistant films suitable for outdoor applications
- Suitable for both single sided and double sided laminating (encapsulation) of photographic, electrostatic, inkjet-bond, xerographic and lithographic output, as well as many more applications.
- Incorporate UV absorbers for excellent protection from damaging UV rays.